Updates
MiSpeL for Battery Storage: New Rules, Options, and Opportunities for Businesses

Written by:
Anne Fischer

Motiv KI-generiert
Updated on October 6, 2026
Key points at a glance:
The Federal Network Agency adopted the MiSpeL determination on October 1, 2026. It regulates the use of electricity storage facilities and bidirectional charging points.
The delimitation option and the flat-rate option allocate electricity volumes differently, which can result in proportionate market premium and levy advantages.
During the transition period until the end of September 2027, companies require the consent of the grid and metering point operators.
For the flat-rate option, EU State aid approval is additionally required.
On October 1, 2026, the Federal Network Agency adopted the MiSpeL determination. For companies with a PV system and battery storage, this is an important step: Under the specified conditions, storage systems can absorb both solar and grid electricity in mixed operation.
This creates more scope for self-consumption as well as flexible charging and feeding into the grid. Which option and benefits apply in individual cases depends on the system and the transitional conditions.
This article explains which MiSpeL option fits which system configuration and what companies should specifically review during the transition period.
What changes with MiSpeL for companies with battery storage?
MiSpeL makes it easier for companies to charge battery storage systems with both their own solar power and electricity from the public grid.

The subsidy for solar power fed into the grid at a later time can be retained on a proportionate basis. Under the previous exclusivity option, this subsidy required that the storage facility was charged exclusively with renewable electricity.
The decisive factor is the mathematical allocation of the electricity volumes fed into the grid. MiSpeL provides two methods for this: the delimitation option and the flat-rate option. They determine, according to different rules, what share of the feed-in can be considered for the EEG market premium and what share is eligible for levy netting.
This gives companies more flexibility to combine self-consumption, low-cost grid electricity sourcing, and price-optimized feed-in. However, MiSpeL guarantees neither a subsidy for all feed-in volumes nor flat-rate savings. Which benefits can be utilized depends on the system setup, the eligible option, and the prerequisites for its application.
The determination also takes into account unsubsidized generation facilities and certain configurations without on-site electricity generation. MiSpeL is therefore not only relevant for companies with subsidized PV systems.

What applied before?
Before the Federal Network Agency introduced MiSpeL, the so-called exclusivity option applied: A subsidized battery storage system connected to a solar installation could only be charged with solar electricity. This rule was so strict that, in practice, it left companies with a PV system and storage facility with virtually no economic leeway.
Compared to MiSpeL, the exclusivity option entailed three main restrictions for companies with battery storage:
Total loss of subsidy with minimal grid consumption: If even a single kilowatt-hour of electricity from the public grid entered the storage system, the entire subsidy for this storage system was forfeited—retroactively for the entire calendar year.
Exclusion of bidirectional charging points: Charging stations for electric cars that can also feed electricity back into the grid could practically not be used. An electric car inevitably also charges elsewhere, almost always bringing grid electricity along with it.
Obstruction of arbitrage: With arbitrage, companies sell electricity to the grid when prices are high and recharge the storage system when electricity is cheap. Even a single kilowatt-hour of cheap grid electricity could trigger the loss of the subsidy here.
Industrial companies with energy storage systems were therefore faced with an either-or decision under the exclusivity option: either secure the subsidy or use the flexibility of the storage system economically. Both at the same time was not possible.
Mixed operation of battery storage: How will companies use battery storage more flexibly in the future?
With the new delimitation option as part of the MiSpeL determination, the Federal Network Agency resolves the previous either-or choice between subsidies and flexible storage use. This is made possible by so-called mixed electricity storage systems, which are permitted to absorb both solar power and grid electricity without automatically losing their subsidy.
Instead of categorically excluding the storage facility from the subsidy, the delimitation option under MiSpeL divides the electricity proportionally. Fixed calculation formulas use quarter-hourly metering to automatically determine what portion of the incoming and outgoing electricity is eligible for subsidies and for what portion levies can be saved.
According to the Federal Network Agency, the delimitation option under MiSpeL enables four simultaneous use cases that were previously mutually exclusive under the old exclusivity option.
In the future, companies can therefore deploy their storage systems in parallel for self-consumption optimization, for arbitrage on the electricity market, and for the continued subsidized feed-in of solar power. An intelligent plant control system helps coordinate these various operating modes cost-effectively.
Use case | Definition | Old exclusivity option | New delimitation option under MiSpeL |
Optimization of self-consumption | Stored solar power is used specifically when there is demand within the company. | 🟢 Possible | 🟢 Possible |
Optimization of grid electricity purchase | The timing of electricity procurement from the grid is adjusted to demand and availability. | 🟢 Possible | 🟢 Possible |
RES marketing with subsidy | Solar power from the storage system is fed into the grid, and the market premium continues to be claimed for it. | 🔴 Not possible | 🟢 Possible |
Arbitrage with levy advantage | Electricity is sold at high prices and recharged cheaply at low prices without losing the subsidy or levy benefits. | 🔴 Not possible | 🟢 Possible |
The crucial difference between the old and new regulations lies in the last two rows of the table: Only the delimitation option introduced with MiSpeL makes it possible to claim both the subsidy and market-oriented storage use simultaneously. Previously, companies had to choose between the two; in the future, both benefits can be combined.

MiSpeL comparison: Delimitation option or flat-rate option for businesses?
For companies with a manageable configuration consisting of a PV system and a storage facility, the simpler flat-rate option is usually sufficient. On the other hand, those combining multiple generation units, charging points, or special cases are better off with the more precise delimitation option.
What are the delimitation option and flat-rate option?
The delimitation option and the flat-rate option are two methods with which the MiSpeL determination resolves the same task: dividing the electricity into a subsidized portion and a levy-reducing portion. The difference lies in how accurately and with what effort this allocation takes place:
The delimitation option calculates the relevant electricity volumes on a quarter-hourly basis using fixed formulas. This provides precise results, but requires a suitable metering concept with quarter-hourly recording.
The flat-rate option works with simplified approximation values. This means less metering effort with slightly lower precision.
Its higher accuracy makes the delimitation option particularly relevant for more complex configurations. According to Annex 1 of the MiSpeL determination, the delimitation option explicitly covers numerous special cases, such as:
multiple identical solar installations
different types of generation, such as solar and wind combined
electricity storage with separate supply to a heat pump
configurations with special provisions such as the special equalization scheme (BesAR)
Another practically important difference between the delimitation option and the flat-rate option concerns availability: The delimitation option can be used as soon as the MiSpeL determination enters into force. The flat-rate option, on the other hand, will only become available once the EU Commission has granted State aid approval.
Criterion | Delimitation option | Flat-rate option |
Accuracy | Quarter-hourly calculation according to fixed formulas | Simplified determination using approximation values |
Effort | Higher: suitable metering concept with quarter-hourly recording required | Lower: reduced metering effort |
Suitability | More complex system configurations (multiple generation units, charging points, consumption points) | Simpler, standardized approach |
Legal basis | Section 19 (3b) EEG and Section 21 (1) to (4) EnFG | Section 19 (3c) EEG / Section 21 (4a) EnFG |
Availability | Upon the determination coming into force | Only after State aid approval by the EU Commission |
What companies must do now to benefit
In order to benefit from the MiSpeL determination, companies with a PV system and storage facility must pay particular attention to four points:
Allocation requirement: Under the MiSpeL determination, the renewable energy installation, electricity storage facility, and charging points must be clearly assigned to direct marketing via the market premium, including stating whether the delimitation option or the flat-rate option is being used.
Suitable metering concept: The requirements for metering and formulas must be complied with under MiSpeL. For the delimitation option, quarter-hourly recording is necessary.
Coordination with grid and metering point operators: During the MiSpeL transition period until September 30, 2027, mutual agreement on application with the respective grid operator is required.
Duty to provide proof: According to the MiSpeL determination, grid and metering point operators must facilitate the claiming of the privileges technically and organizationally. This simplifies implementation, but does not replace the company's own obligation to provide proof.
MiSpeL: From when? These dates apply to companies
From publication to full implementation, the MiSpeL determination goes through several stages spanning just over a year. The following overview shows the most important dates:
August 5, 2026: Publication of the working draft on MiSpeL by the Federal Network Agency
October 1, 2026: Entry into force of the MiSpeL determination upon its announcement
October 2, 2026: Workshop of the Federal Network Agency on MiSpeL
Until September 30, 2027: Transitional arrangement subject to individual approval by grid and metering point operators
No fixed date: Launch of the flat-rate option on the first calendar month following State aid approval by the EU Commission regarding Section 19 (3c) EEG
Conclusion: How companies with commercial storage can use MiSpeL more economically
With the MiSpeL determination, the Federal Network Agency puts an end to a long-standing regulatory gray area: Companies will in future be able to use battery storage and bidirectional charging points economically and flexibly in mixed operation—i.e., with grid power and solar power combined—without losing EEG subsidies or levy benefits.
Thus, MiSpeL also creates new opportunities for commercial storage to lower electricity costs and better exploit existing flexibility.
For industrial companies with their own PV generation and storage infrastructure, MiSpeL opens up new avenues to reduce energy costs and take part in flexibility marketing. In addition, a commercial electricity comparison for businesses can be used to check whether further savings potential exists in power procurement.
Would you like to know what savings potential MiSpeL opens up for your battery storage system?
trawa analyzes your individual system setup, identifies potential savings through flexible storage operation, and supports you with the next steps—from choosing the right option to profitable implementation. Contact us to evaluate your savings potential.
Frequently Asked Questions:
What is MiSpeL?
MiSpeL stands for “Market Integration of Storage Systems and Charging Points” (Marktintegration von Speichern und Ladepunkten) and is a determination by the Federal Network Agency. It governs how electricity from battery storage and bidirectional charging points is treated when fed back into the grid—namely, whether levies apply and whether the EEG subsidy remains intact.
MiSpeL timeline: When does the determination apply?
MiSpeL enters into force on October 1, 2026. A transitional arrangement applies until September 30, 2027: During this period, the new rules only take effect if the grid operator and metering point operator agree in the individual case. The flat-rate option will only launch on the first calendar month after State aid approval by the EU Commission.
What changes with the determination for companies with battery storage?
Companies will be permitted to use their battery storage systems in mixed operation, meaning charging them simultaneously with grid electricity and their own solar power without losing the EEG subsidy. Previously, just a single kilowatt-hour of grid electricity in the storage unit resulted in the loss of the entire subsidy for the entire calendar year.
Delimitation option or flat-rate option: Which is worthwhile under MiSpeL?
Both the delimitation option and the flat-rate option divide the electricity into a subsidized share and a share with reduced levies, but they differ in their calculation method. The delimitation option calculates down to the quarter-hour using fixed formulas and is suitable for more complex systems. The flat-rate option works with approximation values and requires less metering effort.
Does the determination also apply to bidirectional charging points and EV fleets?
Yes. In the delimitation option, bidirectionally usable charging points are treated the same as electricity storage facilities and can likewise take advantage of levy privileges and subsidy payments. Under the previous exclusivity option, their use was virtually impossible.
How should companies prepare ahead of entry into force?
Companies should check which option fits their system setup, adapt their metering concept accordingly, and initiate talks with their grid operator and metering point operator early on. During the transition phase up to September 30, 2027, their consent is required on a case-by-case basis.
How can companies with PV systems and storage save on electricity costs through MiSpeL?
Through the MiSpeL determination, the Federal Network Agency makes it easier for companies to operate their battery storage systems more flexibly: They can use grid and solar electricity in mixed operation, optimize the timing of electricity procurement, and recharge when prices are favorable. Depending on the system setup, levy advantages are retained as well, while arbitrage or flexibility marketing enables new revenue streams.
This is particularly relevant for companies with commercial storage that want to use MiSpeL to combine EEG subsidies, self-consumption optimization, and flexible electricity purchasing.
Sources
[1] Federal Network Agency. (2025). Arbeitsstand des Tenors für die Festlegung zur Marktintegration von Speichern und Ladepunkten (MiSpeL). https://www.bundesnetzagentur.de/DE/Fachthemen/ElektrizitaetundGas/ErneuerbareEnergien/EEG_Aufsicht/MiSpeL/DL/Tenor_Arbeitsstand.pdf?__blob=publicationFile&v=4
[2] Federal Network Agency. (2025). Marktintegration von Speichern und Ladepunkten (MiSpeL): Anlage 1: Abgrenzungsoption. https://www.bundesnetzagentur.de/DE/Fachthemen/ElektrizitaetundGas/ErneuerbareEnergien/EEG_Aufsicht/MiSpeL/DL/Anlage1_Arbeitsstand.pdf?__blob=publicationFile&v=7
[3] Federal Network Agency. (2025). Marktintegration von Speichern und Ladepunkten (MiSpeL): Anlage 2: Pauschaloption. https://www.bundesnetzagentur.de/DE/Fachthemen/ElektrizitaetundGas/ErneuerbareEnergien/EEG_Aufsicht/MiSpeL/DL/Anlage2_Arbeitsstand.pdf?__blob=publicationFile&v=3
Updates
Have questions? We have the answers.
Do I have to commit to a long-term contract if I use wind power?
What information can I view on the Trawa Energy Portal?
How does trawa’s electricity procurement work?
What is the minimum electricity requirement to be able to use trawa’s electricity supply?
How much can I save on my electricity bills with trawa?
What are PPAs and how do they work in the trawa system?
How does trawa protect me from price fluctuations?
Do I have to sort out the purchasing myself?
What are the benefits of trawa’s green electricity procurement?
What happens if my consumption pattern changes?
Can trawa handle supply for several company sites?



